Product Description:
TapeManBlue Flashing Tape features a durable polypropylene backing with a high-performance acrylic adhesive that creates a permanent, weather-tight seal on most clean, dry building surfaces. Its flexible construction conforms easily around curves and corners, making it ideal for sealing window and door installations, structural insulated panel (SIP) seams, sheathing joints, and other building envelope penetrations.
Product Properties & Characteristics - Nominal Results:
|
Total Thickness |
9.5 mils |
|
Adhesion to OSB |
67 oz/in |
|
Adhesion to Aluminum |
144 oz/in |
|
Adhesion to Vinyl |
144 oz/in |
|
Adhesion to Plywood |
133 oz/in |
|
Adhesion to Backing |
ASTM D3759 Procedure A 38 oz/in |
|
Tensile Strength |
25 lb/in |
|
Elongation |
820% |
|
Installation Temperature |
20 to 180°F |
|
Operating Temperature |
-30 to 200°F |
|
UV Exposure |
1 year |
The values listed above are averages determined by standard production testing procedures. The suitability for use shall be determined by the user for the particular application.
Recommended Storage Conditions
For optimal product performance, store tape under the following conditions:
- Temperature: 60°F–80°F (16°C–27°C)
- Relative Humidity: 40%–60%
- Store in the original packaging until ready for use.
- Keep away from temperature extremes, direct sunlight, moisture, and water.
Exposure to excessive heat or cold, UV radiation, humidity, or moisture may degrade the tape and result in reduced product performance.
Shelf Life
Shelf life is 12 months from the date of manufacture when stored under the recommended conditions listed above.
Application Guidelines
For best results, application surfaces should be clean, dry, and free of dust, dirt, lubricants, solvents, or other contaminants prior to applying the tape.
Limitations of Warranty
Seller warrants to customers that coated products delivered by Seller to be free of defects in workmanship and to meet the specifications published, which are available upon request. For a period of six (6) months from date of delivery and in the event product proved to be defective, the excluding solution, at Seller’s option, shall be a) refund the purchase price b) repair or c) replace the defective product. No acceptance or responsibility for loss, or expense, implied or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability in connection herewith. This stated Warranty & Limitation of Liability can only be changed through a written agreement by an authorized officer of company. For complete warranty information, please see our Limited Warranty.